What You Need to Use LineTestLineTest has only two requirements:
First, print out these instructions. You'll need to hang up and disconnect from the Internet to complete the test.
The LineTest system will perform a series of diagnostics on your connection, and will inform you of its conclusion. This may take a minute or so. If you see: "This connection supports 56K* technology!" Congratulations -- you're in good company!
If you're not interested in this information, type in the letter g, then press the 'Enter' key to disconnect. Dial up your Internet connection again, and you're ready to step up to high-speed downloads from the Internet!
If you see: "Your line does not support 56K technology." Since line conditions can change from call to call, we recommend that you make several calls to LineTest to ensure an accurate diagnosis. If you have multiple phone lines available for use, we recommend that you try calling from each line. If you see: "56K is not currently possible on this connection, or is likely to be highly impaired." Type in the letter g, then press the 'Enter' key to disconnect. The most likely reason for this response is more than one analog-to-digital conversion in the connection to your provider. If multiple calls indicate that your line won't support 56K technology, keep in mind that telephone network configurations can change, so your chances of making high-speed connections may improve over time. If you see: "Cannot determine 56K capability, test must run in V.34 mode." Type in the letter g, then press the 'Enter' key to disconnect. You may get this response if you have excessive "noise" or static on your phone line. Since line conditions can change from call to call, we recommend you try again at another time.
Important Note *Capable of receiving at up to 56 Kbps and sending at up to 31.2 Kbps. Due to FCC regulations, receiving speeds are limited to 53 Kbps. Actual speeds may vary. Requires compatible phone line and server equipment. Complies with both the V.90 56K standard and x2 technology protocol. Standard officially determined in February 1998; ratification expected in September 1998. |