 |
Index for
Section 4 |
|
 |
Alphabetical
listing for T |
|
 |
Bottom of
page |
|
terminfo(4)
NAME
terminfo - Describes terminals by capability
DESCRIPTION
A terminfo file is a database that describes the capabilities and method of
operation of various terminals. The database includes definitions of
initialization sequences, padding requirements, cursor positioning, and
other command sequences that control specific terminals.
Before a terminfo source file can be used, it must be compiled using the
tic command. The compiled terminfo entries are placed into subdirectories
of the /usr/lib/terminfo directory. This directory may be redefined with
the TERMINFO environment variable. See the EXAMPLES section for more
information on using the TERMINFO environment variable.
Each terminfo file entry consists of a number of fields separated by
commas. Any white space between commas is ignored. The first field for
each terminal supplies the names the terminal is known by, separated by
vertical bars (|). The first name given is the most common abbreviation
for the terminal, the last name given is a long name fully identifying the
terminal, and all others are synonyms for the terminal name. All names
except the last are in lowercase and do not contain any white space.
The fields following the terminal name supply the capabilities of the
terminal. Although capability names have no absolute length limit, an
informal limit of 5 characters is adopted to keep them short and to allow
the tabs in the source file caps to be aligned. Whenever possible, names
are chosen to be the same as or similar to the ANSI X3.64 standard of 1979.
Terminal names (except the last) are chosen using the following
conventions. A root name is chosen to represent the particular hardware
class of the terminal. This name does not contain hyphens, except to avoid
synonyms that conflict with other names. Possible modes for the hardware or
user preferences are indicated by appending a - (hyphen) and one of the
following suffixes:
-am With automatic margins (usually default)
-c Color mode
-w Wide mode (more than 80 columns)
-nam
Without automatic margins
-n Number of lines on the screen
-na No arrow keys (leave them in local)
-np Number of pages of memory
-rv Reverse video
Thus, a vt100 terminal in 132-column mode would be vt100-w.
Capabilities in the terminfo file are of three types:
· Boolean capabilities indicate that the terminal has some particular
feature. Boolean capabilities are evaluated as true if the
corresponding name is in the terminal description.
· Numeric capabilities give the size of the terminal or the size of
particular delays.
· String capabilities give a sequence that can be used to perform
particular terminal operations.
To continue an entry onto multiple lines, place white space at the
beginning of each subsequent line. Include a comment on a line beginning
with the # (number sign) character. To comment out an individual
capability, precede it with a . (dot).
List of Capabilities
The following table shows the C variable (which the programmer uses to
access the terminfo capabilities), the capability name (the short name used
in the text of the database), the 2-letter internal code used in the
compiled database (always corresponding to a termcap capability name), and
a short description of each capability.
_____________________________________________________________________________
Boolean Name Code Description
_____________________________________________________________________________
auto_left_margin bw bw
Indicates cub1 wraps from column 0
(zero) to last column.
auto_right_margin am am
Indicates terminal has automatic
margins
back_color_erase bce be
Screen erased with background
color.
beehive_glitch xsb xs
Indicates a terminal with F1=<esc>
and F2=Ctrl-C.
can_change ccc cc
Terminal can re-define existing
color.
ceol_standout_glitch xhp xs
Indicates standout not erased by
overwriting.
col_addr_glitch xhpa YA
Only positive motion for hpa/mhpa
caps.
cpi_changes_res cpix YF
Changing character pitch changes
resolution.
crxm YB
cr_cancels_micro_mode
Using a carriage return turns off
micro mode.
eat_newline_glitch xenl xn
Ignores newline character after 80
columns.
erase_overstrike eo eo Erases overstrikes with a blank.
generic_type gn gn
Indicates generic line type (such
as dialup, switch).
hard_copy hc hc Indicates hardcopy terminal.
hard_cursor chts HC Cursor is hard to see.
has_meta_key km km
Indicates terminal has a meta key
(shift, sets parity bit).
has_print_wheel daisy YC
Printer needs operator to change
character set.
has_status_line hs hs
Indicates terminal has extra status
line.
hls hl
hue_lightness_saturation
Terminal uses only HLS color
notation (Tektronix).
insert_null_glitch in in
Indicates insert mode distinguishes
nulls.
lpi_changes_res lpix YG
Changing line pitch changes
resolution.
memory_above da da
Retains information above display
in memory.
memory_below db db
Retains information below display
in memory.
move_insert_mode mir mi
Indicates safe to move while in
insert mode.
move_standout_mode msgr ms
Indicates safe to move in standout
mode.
needs_xon_xoff nxon nx
Padding will not work, xon/xoff
required.
non_rev_rmcup nrrmc NR smcup does not reverse rmcup.
no_pad_char npc NP Pad character does not exist.
over_strike os os Indicates terminal overstrikes.
prtr_silent mc5i 5i Printer will not echo on screen.
row_addr_glitch xvpa YD
Only positive motion for rpa/mvpa
caps.
sam YE
semi_auto_right_margin
Printing in last column causes a
carriage return.
status_line_esc_ok eslok es
Indicates escape can be used on the
status line.
teleray_glitch xt xt
Indicates destructive tabs and
blanks inserted while entering
standout mode.
tilde_glitch hz hz
Indicates terminal cannot print ~
(tilde) characters.
ul ul
transparent_underline
Overstrikes with underline
character.
xon_xoff xon xo
Indicates terminal uses xon/xoff
handshaking.
_____________________________________________________________________________
__________________________________________________________________________
Number Name Code Description
__________________________________________________________________________
buffer_capacity bufsz Ya
Number of bytes buffered before
printing.
columns cols co
Specifies the number of columns in
a line.
dot_horz_spacing spinh Yc
Spacing of dots horizontally in
dots per inch.
dot_vert_spacing spinv Yb
Spacing of pins vertically in pins
per inch.
init_tabs it it
Provides tabs initially every #1
spaces.
label_height lh lh Number of rows in each label.
label_width lw lw Number of columns in each label.
lines lines li
Specifies the number of lines on
screen or page.
lines_of_memory lm lm
Specifies the number of lines of
memory if greater than the number
of lines on the screen. A value of
0 (zero) indicates that the number
of lines is variable.
magic_cookie_glitch xmc sg
Indicates number of blank
characters left by smso or rmso.
max_colors colors Co
Maximum number of colors on the
screen.
max_micro_address maddr Yd Maximum value in micro_..._address.
max_micro_jump mjump Ye Maximum value in parm_..._micro.
max_pairs pairs pa
Maximum number of color-pairs on
the screen.
micro_col_size mcs Yf
Character step size when in micro
mode.
micro_line_size mls Yg Line step size when in micro mode.
no_color_video ncv NC
Video attributes that cannot be
used.
number_of_pins npins Yh Number of pins in print-head.
num_labels nlab Nl
Number of labels on screen (start
at 1).
output_res_char orc Yi
Horizontal resolution in units per
character.
output_res_line orl Yj
Vertical resolution in units per
line.
output_res_horz_inch orhi Yk
Horizontal resolution in units per
inch.
output_res_vert_inch orvi Yl
Vertical resolution in units per
inch.
padding_baud_rate pb pb
Indicates lowest baud where
carriage return and line return
padding is needed.
virtual_terminal vt vt Indicates virtual terminal number.
wide_char_size widcs Yn Character step size when in double.
width_status_lines wsl ws
Specifies the number of columns in
status line.
__________________________________________________________________________
______________________________________________________________________
String Name Code Description
______________________________________________________________________
acs_chars acsc ac
Graphic character set
pairs aAbBcC.
alt_scancode_esc scesca SY
Alternate escape for
scancode emulation.
appl_defined_str apstr za
Application-defined
terminal string.
back_tab cbt bt Back tab. (P)
bell bel bl
Produces an audible signal
(bell). (P)
bicr Yv
bit_image_carriage_return
Move to beginning of same
row (use tparm).
bit_image_newline binel Zz
Move to next row of the
bit image (use tparm).
bit_image_repeat birep Xy
Repeat bit-image cell #1
#2 times (use tparm).
box_chars_1 box1 bx
Box characters primary
set.
box_chars_2 box2 by
Box characters alternate
set.
box_attr_1 batt1 Bx
Attributes for
box_chars_1.
box_attr_2 batt2 By
Attributes for
box_chars_2.
carriage_return cr cr
Indicates carriage return.
(P*)
change_char_pitch cpi ZA
Change number of
characters per inch.
change_scroll_region csr cs
Changes scroll region to
lines 1 through 2. (PG)
change_line_pitch lpi ZB
Change number of lines per
inch.
change_res_horz chr ZC
Change horizontal
resolution.
change_res_vert cvr ZD
Change vertical
resolution.
char_padding rmp rP
Similar to insert_padding,
but when in replace mode.
char_set_names csnm Zy
List of character set
names.
clear_all_tabs tbc ct Clears all tab stops. (P)
clear_margins mgc MC
Clear all margins (top,
bottom, and sides).
clear_screen clear cl
Clears screen and puts
cursor in home position.
(P*)
clr_bol el1 cb
Clear to beginning of
line, inclusive.
clr_eol el ce Clears to end of line. (P)
clr_eos ed cd
Clears to end of the
display. (P*)
code_set_init csin ci
Init sequence for multiple
codesets.
______________________________________________________________________
________________________________________________________________
String Name Code Description
________________________________________________________________
color_bg_0 colb0 d0 Background color 0 black.
color_bg_1 colb1 d1 Background color 1 red.
color_bg_2 colb2 d2 Background color 2 green.
color_bg_3 colb3 d3 Background color 3 brown.
color_bg_4 colb4 d4 Background color 4 blue.
color_bg_5 colb5 d5
Background color 5
magenta.
color_bg_6 colb6 d6 Background color 6 cyan.
color_bg_7 colb7 d7 Background color 7 white.
color_fg_0 colf0 c0 Foreground color 0 white.
color_fg_1 colf1 c1 Foreground color 1 red.
color_fg_2 colf2 c2 Foreground color 2 green.
color_fg_3 colf3 c3 Foreground color 3 brown.
color_fg_4 colf4 c4 Foreground color 4 blue.
color_fg_5 colf5 c5
Foreground color 5
magenta.
color_fg_6 colf6 c6 Foreground color 6 cyan.
color_fg_7 colf7 c7 Foreground color 7 black.
color_names colornm Yw Give name for color #1.
column_address hpa ch Sets cursor column. (PG)
command_character cmdch CC
Indicates terminal command
prototype character can be
set.
cursor_address cup cm
Indicates screen relative
cursor motion row #1 col
#2. (PG)
cursor_down cud1 do
Moves cursor down one
line.
cursor_home home ho
Moves cursor to home
position (if no cup).
cursor_invisible civis vi Makes cursor invisible.
cursor_left cub1 le
Moves cursor left one
space.
cursor_mem_address mrcup CM
Indicates memory relative
cursor addressing.
cursor_normal cnorm ve
Makes cursor appear normal
(undo vs or vi).
cursor_right cuf1 nd
Indicates nondestructive
space (cursor right).
cursor_to_ll ll ll
Moves cursor to first
column of last line (if no
cup).
cursor_up cuu1 up
Moves cursor up one line
(cursor up).
cursor_visible cvvis vs Makes cursor very visible.
________________________________________________________________
_____________________________________________________________________
String Name Code Description
_____________________________________________________________________
defbi Yx
define_bit_image_region
Define rectangular bit-
image region (use tparm).
define_char defc ZE
Define a character in a
character set.
delete_character dch1 dc Deletes character. (P*)
delete_line dl1 dl Deletes line. (P*)
device_type devt dv
Indicate language/codeset
support.
display_pc_char dispc SP Display PC character.
dis_status_line dsl ds Disables status line.
down_half_line hd hd
Indicates subscript
(forward 1/2 linefeed).
ena_acs enacs eA
Enable alternate character
set.
end_bit_image_region endbi Yy
End a bit-image region
(use tparm).
enter_alt_charset_mode smacs as
Starts alternate character
set (P)
enter_am_mode smam SZ Turn on automatic margins
enter_blink_mode blink mb Enables blinking
enter_bold_mode bold md
Enables bold (extra
bright) mode
enter_ca_mode smcup ti
Begins programs that use
cup
enter_delete_mode smdc dm Starts delete mode
enter_dim_mode dim mh Enables half-bright mode
enter_doublewide_mode swidm ZF
Enable double wide
printing
enter_draft_quality sdrfq ZG Set draft quality print
enter_insert_mode smir m Starts insert mode
enter_italics_mode sitm ZH Enable italics
enter_leftward_mode slm ZI
Enable leftward carriage
motion
enter_micro_mode smicm ZJ
Enable micro motion
capabilities
snlq ZK
enter_near_letter_quality
Set near-letter quality
print
enter_normal_quality snrmq ZL
Set near-letter quality
print
enter_pc_charset_mode smpch SQ
Enter PC character display
mode
_____________________________________________________________________
__________________________________________________________________
String Name Code Description
__________________________________________________________________
enter_protected_mode prot mp Enables protected mode.
enter_reverse_mode rev mr Enables reverse video mode
enter_scancode_mode smsc ST Enter PC scancode mode
enter_secure_mode invis mk
Enables blank mode
(characters invisible).
enter_shadow_mode sshm ZM Enable shadow printing
enter_standout_mode smso so Begins standout mode.
enter_subscript_mode ssubm ZN Enable subscript printing
enter_superscript_mode ssupm ZO
Enable superscript
printing
enter_underline_mode smul us Starts underscore mode.
enter_upward_mode sum ZP
Enable upward carriage
motion
enter_xon_mode smxon SX
Turn on xon/xoff
handshaking
erase_chars ech ec Erases #1 characters. (PG)
exit_alt_charset_mode rmacs ae
Ends alternate character
set. (P)
exit_am_mode rmam RA Turn off automatic margins
exit_attribute_mode sgr0 me Disables all attributes.
exit_ca_mode rmcup te
Ends programs that use
cup.
exit_delete_mode rmdc ed Ends delete mode.
exit_doublewide_mode rwidm ZQ
Disable double wide
printing
exit_insert_mode rmir ei Ends insert mode.
exit_italics_mode ritm ZR Disable italics.
exit_leftward_mode rlm ZS Enable rightward (normal).
exit_micro_mode rmicm ZT
Disable micro motion
capabilities.
exit_pc_charset_mode rmpch SS
Disable PC character
display mode.
exit_scancode_mode rmsc SU Disable PC scancode mode.
exit_shadow_mode rshm ZU Disable shadow printing.
exit_standout_mode rmso se Ends standout mode.
exit_subscript_mode rsubm ZV
Disable subscript
printing.
exit_superscript_mode rsupm ZW
Disable superscript
printing.
__________________________________________________________________
_______________________________________________________________
String Name Code Description
_______________________________________________________________
exit_underline_mode rmul ue Ends underscore mode.
exit_upward_mode rum ZX Enable downward (normal).
exit_xon_mode rmxon RX
Turn off xon/xoff
handshaking.
flash_screen lash vb
Indicates visual bell (may
not move cursor).
font_0 font0 f0 Select font 0.
font_1 font1 f1 Select font 1.
font_2 font2 f2 Select font 2.
font_3 font3 f3 Select font 3.
font_4 font4 f4 Select font 4.
font_5 font5 f5 Select font 5.
font_6 font6 f6 Select font 6.
font_7 font7 f7 Select font 7.
form_feed ff ff
Ejects page (hardcopy
terminal). (P*)
from_status_line fsl fs Returns from status line.
init_1string is1 i1 Initializes terminal.
init_2string is2 i2 Initializes terminal.
init_3string is3 i3 Initializes terminal.
init_file if if
Identifies file containing
is.
initialize_color initc Ic
Initialize the definition
of color.
initialize_pair initp Ip Initialize color-pair.
insert_character ich1 ic Inserts character. (P)
insert_line il1 al Adds new blank line. (P*)
insert_padding ip ip
Inserts pad after
character inserted. (P*)
key_action kact kJ Sent by the action key.
key_backspace kbs kb Sent by the backspace key.
key_back_tab kbtab k0 Sent by the backtab key.
key_beg kbeg @1
KEY_BEG, sent by the
beg(inning) key.
key_btab kcbt kB
KEY_BTAB, sent by the
back-tab key.
key_cancel kcan @2
KEY_CANCEL, sent by the
cancel key.
_______________________________________________________________
____________________________________________________________
String Name Code Description
____________________________________________________________
key_catab ktbc ka
Sent by the clear-all-tabs
key.
key_clear kclr kC
Sent by the clear-screen
or erase key.
key_close kclo @3
KEY_CLOSE, sent by the
close key.
key_copy kcpy @5
KEY_COPY, sent by the copy
key.
key_create kcrt @6
KEY_CREATE, sent by the
create key.
key_ctab kctab kt Sent by the clear-tab key.
key_command kcmd kc Command request key.
key_command_pane kcpn kW Command pane key.
key_dc kdch1 kD
Sent by the delete-
character key.
key_dl kdl1 kL
Sent by the delete-line
key.
key_do kdo ki Do request key.
key_down kcud1 kd
Sent by the terminal
cursor down key.
key_eic krmir kM
Sent by rmir or smir in
insert mode.
key_end kend kw End key.
key_enter kent @8
KEY_ENTER, sent by the
enter/send key.
key_eol ke1 kE
Sent by the clear-to-end-
of-line key.
key_eos ked kS
Sent by the clear-to-end-
of-screen key.
key_exit kext @9
KEY_EXIT, sent by the exit
key.
____________________________________________________________
_________________________________________________
String Name Code Description
_________________________________________________
key_f0 kf0 k0 Sent by function key F0.
key_f1 kf1 k1 Sent by function key F1.
key_f2 kf2 k2 Sent by function key F2.
key_f3 kf3 k3 Sent by function key F3.
key_f4 kf4 k4 Sent by function key F4.
key_f5 kf5 k5 Sent by function key F5.
key_f6 kf6 k6 Sent by function key F6.
key_f7 kf7 k7 Sent by function key F7.
key_f8 kf8 k8 Sent by function key F8.
key_f9 kf9 k9 Sent by function key F9.
key_f10 kf10 k Sent by function key F10.
key_f11 kf11 k< Sent by function key F11.
key_f12 kf12 k> Sent by function key F12.
key_f13 kf13 k! Sent by function key F13.
key_f14 kf14 k@ Sent by function key F14.
key_f15 kf15 k# Sent by function key F15.
key_f16 kf16 k$ Sent by function key F16.
key_f17 kf17 k% Sent by function key F17.
key_f18 kf18 k^ Sent by function key F18.
key_f19 kf19 k& Sent by function key F19.
key_f20 kf20 k* Sent by function key F20.
key_f21 kf21 k( Sent by function key F21.
key_f22 kf22 k) Sent by function key F22.
key_f23 kf23 k- Sent by function key F23.
key_f24 kf24 k_ Sent by function key F24.
key_f25 kf25 k+ Sent by function key F25.
key_f26 kf26 k, Sent by function key F26.
key_f27 kf27 k: Sent by function key F27.
key_f28 kf28 k? Sent by function key F28.
key_f29 kf29 k[ Sent by function key F29.
key_f30 kf30 k] Sent by function key F30.
key_f31 kf31 k{ Sent by function key F31.
key_f32 kf32 k} Sent by function key F32.
key_f33 kf33 k| Sent by function key F33.
key_f34 kf34 k~ Sent by function key F34.
key_f35 kf35 k/ Sent by function key F35.
key_f36 kf36 k= Sent by function key F36.
_________________________________________________
__________________________________________________
String Name Code Description
__________________________________________________
key_f37 kf37 FR
KEY_F(37) sent by function
key F37.
key_f38 kf38 FS
KEY_F(38) sent by function
key F38.
key_f39 kf39 FT
KEY_F(39) sent by function
key F39.
key_f40 kf40 FU
KEY_F(40) sent by function
key F40.
key_f41 kf41 FV
KEY_F(41) sent by function
key F41.
key_f42 kf42 FW
KEY_F(42) sent by function
key F42.
key_f43 kf43 FX
KEY_F(43) sent by function
key F43.
key_f44 kf44 FY
KEY_F(44) sent by function
key F44.
key_f45 kf45 FZ
KEY_F(45) sent by function
key F45.
key_f46 kf46 Fa
KEY_F(46) sent by function
key F46.
key_f47 kf47 Fb
KEY_F(47) sent by function
key F47.
key_f48 kf48 Fc
KEY_F(48) sent by function
key F48.
key_f49 kf49 Fd
KEY_F(49) sent by function
key F49.
key_f50 kf50 Fe
KEY_F(50) sent by function
key F50
key_f51 kf51 Ff
KEY_F(51) sent by function
key F51.
key_f52 kf52 Fg
KEY_F(52) sent by function
key F52.
key_f53 kf53 Fh
KEY_F(53) sent by function
key F53.
key_f54 kf54 Fi
KEY_F(54) sent by function
key F54.
key_f55 kf55 Fj
KEY_F(55) sent by function
key F55.
key_f56 kf56 Fk
KEY_F(56) sent by function
key F56.
key_f57 kf57 Fl
KEY_F(57) sent by function
key F57.
key_f58 kf58 Fm
KEY_F(58) sent by function
key F58.
key_f59 kf59 Fn
KEY_F(59) sent by function
key F59.
key_f60 kf60 Fo
KEY_F(60) sent by function
key F60.
key_f61 kf61 Fp
KEY_F(61) sent by function
key F61.
key_f62 kf62 Fq
KEY_F(62) sent by function
key F62.
key_f63 kf63 Fr
KEY_F(63) sent by function
key F63.
__________________________________________________
_________________________________________________________
String Name Code Description
_________________________________________________________
key_find kfnd @0 KEY_FIND sent by find key
key_help khlp kq Help key.
key_home khome kh Sent by home key.
key_ic kich1 kI
Sent by insert
character/enter insert
mode key.
key_il kil1 kA Sent by insert line key.
key_left kcub1 kl
Sent by terminal cursor
left key.
key_ll kll kH Sent by home-down key.
key_mark kmrk %2
KEY_MARK, sent by mark
key.
key_message kmsg %3
KEY_MESSAGE, sent by
message key.
key_move kmov %4
KEY_MOVE, sent by move
key.
key_newline knl kn New-line key.
key_next_pane knpn kv Next-pane key.
key_npage knp kN Sent by next-page key.
key_open kopn %6
KEY_OPEN, sent by open
key.
key_options kopt %7
KEY_OPTIONS, sent by
options key.
key_ppage kpp kP Sent by previous-page key.
key_prev_cmd kpcmd kp
Sent by previous-command
key.
key_prev_pane kppn kV Previous pane key.
key_previous kprv %8
KEY_PREVIOUS, sent by
previous-object.
key_print kprt %9
KEY_PRINT, sent by print
or copy key.
key_quit kquit kQ Quit key.
key_redo krdo %0
KEY_REDO, sent by redo
key.
key_reference kref &1
KEY_REFERENCE, sent by
ref(erence) key.
key_refresh krfr &2
KEY_REFRESH, sent by
refresh key.
key_replace krpl &3
KEY_REPLACE, sent by
replace key.
key_restart krst &4
KEY_RESTART, sent by
restart key.
key_resume kres &5
KEY_RESUME, sent by resume
key.
key_right kcuf1 kr
Sent by terminal cursor
right key.
_________________________________________________________
____________________________________________________________
String Name Code Description
____________________________________________________________
key_save ksav &6
KEY_SAVE, sent by save
key.
key_sbeg kBEG &9
KEY_SBEG, sent by shifted
beginning key.
key_scancel kCAN &0
KEY_SCANCEL, sent by
shifted cancel key.
key_scommand kCMD *1
KEY_SCOMMAND, sent by
shifted cmd (command) key.
key_scopy kCPY *2
KEY_SCOPY, sent by shifted
copy key.
key_screate kCRT *3
KEY_SCREATE, sent by
shifted create key.
key_scroll_left kscl kz Scroll left.
key_scroll_right kscr kZ Scroll right.
key_sdc kDC *4
KEY_SDC, sent by shifted
delete-char key.
key_sdl kDL *5
KEY_SDL, sent by shifted
delete-line key.
key_select ksel kU Select key.
key_send kEND *7
KEY_SEND, sent by shifted
end key.
key_seol kEOL *8
KEY_SEOL, sent by shifted
clear-line key.
key_sexit kEXT *9
KEY_SEXIT, sent by shifted
exit key.
key_sf kind kF
Sent by scroll-
forward/down key.
key_sf1 ksf1 S1 Special function key 1.
key_sf2 ksf2 S2 Special function key 2.
key_sf3 ksf3 S3 Special function key 3.
key_sf4 ksf4 S4 Special function key 4.
key_sf5 ksf5 S5 Special function key 5.
key_sf6 ksf6 S6 Special function key 6.
key_sf7 ksf7 S7 Special function key 7.
key_sf8 ksf8 S8 Special function key 8.
key_sf9 ksf9 S9 Special function key 9.
key_sf10 ksf10 SA Special function key 10.
____________________________________________________________
_________________________________________________________
String Name Code Description
_________________________________________________________
key_sfind kFND *0
KEY_SFIND, sent by shifted
find key.
key_shelp kHLP #1
KEY_SHELP, sent by shifted
help key.
key_shome kHOM #2
KEY_SHOME, sent by shifted
home key.
key_sic kIC #3
KEY_SIC, sent by shifted
input key.
key_sleft kLFT #4
KEY_SLEFT, sent by shifted
left-arrow.
key_smap_in1 kmpf1 Kv
Input for special mapped
key 1.
key_smap_out1 kmpt1 KV Output for mapped key 1.
key_smap_in2 kmpf2 Kw
Input for special mapped
key 2.
key_smap_out2 kmpt2 KW Output for mapped key 2.
_________________________________________________________
_________________________________________________________
String Name Code Description
_________________________________________________________
key_smap_in3 kmpf3 Kx
Input for special mapped
key 3.
key_smap_out3 kmpt3 KX Output for mapped key 3.
key_smap_in4 kmpf4 Ky
Input for special mapped
key 4.
key_smap_out4 kmpt4 KY Output for mapped key 4.
key_smap_in5 kmpf5 Kz
Input for special mapped
key 5.
key_smap_out5 kmpt5 KZ Output for mapped key 5.
key_smap_in6 kmpf6 Kr
Input for special mapped
key 6.
key_smap_out6 kmpt6 KR Output for mapped key 6.
key_smap_in7 kmpf7 Ks
Input for special mapped
key 7.
key_smap_out7 kmpt7 KS Output for mapped key 7.
key_smap_in8 kmpf8 Kt
Input for special mapped
key 8.
key_smap_out8 kmpt8 KT Output for mapped key 8.
key_smap_in9 kmpf9 Ku
Input for special mapped
key 9.
key_smap_out9 kmpt9 KU Output for mapped key 9.
key_smessage kMSG %a
KEY_SMESSAGE, sent by
shifted message.
key_smove kMOV %b
KEY_SMOVE, sent by shifted
move key.
key_snext kNXT %c
KEY_SNEXT, sent by shifted
next key.
key_soptions kOPT %d
KEY_SOPTIONS, sent by
shifted options.
key_sprevious kPRV %e
KEY_SPREVIOUS, sent by
shifted previous key.
key_sprint kPRT %f
KEY_SPRINT, sent by
shifted print key.
key_sr kri kR
Sent by scroll-backward/up
key.
key_sredo kRDO %g
KEY_SREDO, sent by shifted
redo key.
key_sreplace kRPL %h
KEY_SREPLACE, sent by
shifted replace key.
key_sright kRIT %i
KEY_SRIGHT, sent by
shifted right arrow key.
key_srsume kRES %j
KEY_SRSUME, sent by
shifted resume key.
key_ssave kSAV !1
KEY_SSAVE, sent by save
key
key_ssuspend kSPD !2
KEY_SSUSPEND, sent by
shifted suspend key.
_________________________________________________________
________________________________________________________________
String Name Code Description
________________________________________________________________
key_stab khts k Sent by set-tab key.
key_sundo kUND !3
KEY_SUNDO, sent by shifted
undo key.
key_suspend kspd &7
KEY_SUSPEND, sent by
suspend key.
key_tab ktab ko Tab key.
key_undo kund &8 KEY_UNDO sent by undo key.
key_up kcuu1 ku
Sent by terminal cursor up
key.
keypad_local rmkx ke Ends keypad transmit mode.
keypad_xmit smkx ks
Puts terminal in keypad
transmit mode.
lab_f0 f0 l0
Labels function key F0 if
not F0.
lab_f1 lf1 l1
Labels function key F1 if
not F1.
lab_f2 lf2 l2
Labels function key F2 if
not F2.
lab_f3 lf3 l3
Labels function key F3 if
not F3.
lab_f4 lf4 l4
Labels function key F4 if
not F4.
lab_f5 lf5 l5
Labels function key F5 if
not F5.
lab_f6 lf6 l6
Labels function key F6 if
not F6.
lab_f7 lf7 l7
Labels function key F7 if
not F7.
lab_f8 lf8 l8
Labels function key F8 if
not F8.
lab_f9 lf9 l9
Labels function key F9 if
not F9.
lab_f10 lf10 la
Labels function key F10 if
not F10.
label_off rmln LF Turn off soft labels.
label_on smln LO Turn on soft labels.
meta_on smm mm
Enables meta mode (8th
bit).
meta_off rmm mo Disables meta mode.
micro_column_address mhpa ZY
Like column_address for
micro adjustment.
micro_down mcud1 ZZ
Like curser_down for micro
adjustment.
micro_left mcub1 Za
Like cursor_left for micro
adjustment.
micro_right mcuf1 Zb
Like cursor_right for
micro adjustment.
micro_row_address mvpa Zc
Like row_address micro
adjustment.
micro_up mcuu1 Zd
Like cursor_up for micro
adjustment.
________________________________________________________________
______________________________________________________________
String Name Code Description
______________________________________________________________
newline nel nw
Performs newline function.
(behaves like a carriage
return followed by a
linefeed).
order_of_pins porder Ze
Matches software bits to
print-head pins.
orig_colors oc oc
Set all color(-pair)s to
the original ones.
orig_pair op op
Set default color-pair to
the original one.
pad_char pad pc
Pad character (instead of
null).
parm_dch dch DC
Deletes #1 characters.
(PG*)
parm_delete_line dl DL Deletes #1 lines. (PG*)
parm_down_cursor cud DO
Moves cursor down #1
lines. (PG*)
parm_down_micro mcud Zf
Like parm_down_cursor for
micro adjustment.
parm_ich ich IC
Inserts #1 blank
characters. (PG*)
parm_index indn SF
Scrolls forward #1 lines.
(PG)
parm_insert_line il AL
Adds #1 new blank lines.
(PG*)
parm_left_cursor cub LE
Moves cursor left #1
spaces. (PG)
parm_left_micro mcub Zg
Like parm_left_cursor for
micro adjustment.
parm_right_cursor cuf RI
Moves cursor right #1
spaces. (PG*)
parm_right_micro mcuf Zh
Like parm_right_cursor for
micro adjustment.
parm_rindex rin SR
Scrolls backward #1 lines.
(PG)
parm_up_cursor cuu UP
Moves cursor up #1 lines.
(PG*)
parm_up_micro mcuu Zi
Like parm_up_cursor for
micro adjustment.
pc_term_options pctrm SV PC terminal options.
pkey_key pfkey pk
Programs function key F1
to type string #2.
pkey_local pfloc pl
Programs function key F1
to execute string #2.
pkey_plab pfxl xl
Prog key #1 to xmit string
#2 and show string #3.
pkey_xmit pfx px
Programs function key F1
to xmit string #2.
______________________________________________________________
__________________________________________________________________
String Name Code Description
__________________________________________________________________
plab_norm pln pn
Program label #1 to show
string #2
print_screen mc0 ps
Prints contents of the
screen.
prtr_off mc4 pf Disables the printer.
prtr_on mc5 po Enables the printer.
repeat_char rep rp
Repeats character #1
twice. (PG*)
req_for_input rfi RF
Send next input char (for
ptys)
reset_1string rs1 r1
Resets terminal to known
modes.
reset_2string rs2 r2
Resets terminal to known
modes.
reset_3string rs3 r3
Resets terminal to known
modes.
reset_file rf rf
Identifies the file
containing reset string.
restore_cursor rc rc
Restores cursor to
position of last sc.
row_address vpa cv
Positions cursor to an
absolute vertical position
(set row). (PG)
save_cursor sc sc Saves cursor position. (P)
scancode_escape scesc SW
Escape for scancode
emulation.
scroll_forward ind sf Scrolls text up. (P)
scroll_reverse ri sr Scrolls text down. (P)
select_char_set scs Zj Select character set.
set0_des_seq s0ds s0
Shift into codeset 0 (EUC
set 0, ASCII).
set1_des_seq s1ds s1 Shift into codeset 1.
set2_des_seq s2ds s2 Shift into codeset 2.
set3_des_seq s3ds s3 Shift into codeset 3.
set_a_background setab AB
Set background color using
ANSI escape.
set_a_foreground setaf AF
Set foreground color using
ANSI escape.
set_attributes sgr sa
Defines the video
attributes. (PG*)
set_background setb Sb
Set current background
color.
set_bottom_margin smgb Zk
Set bottom margin at
current line.
set_bottom_margin_parm smgbp Zl
Set bottom margin at line
#1 or #2
set_bottom_margin_parm smgbp Zl
Set bottom margin at line
#1 or #2
__________________________________________________________________
_____________________________________________________________________
String Name Code Description
_____________________________________________________________________
set_color_band setcolor Yz Change to ribbon color #1.
set_color_pair scp sp Set current color-pair.
set_foreground setf Sf
Set current foreground
color1.
set_left_margin smgl ML
Set left margin at current
line.
set_left_margin_parm smglp Zm
Set left (right) margin at
column #1 (#2).
set_lr_margin smglr lr
Sets both left and right
margins.
set_page_length slines YZ
Set page length to #1
lines (use tparm).
set_right_margin smgr MR
Set right margin at
current column.
set_right_margin_parm smgrp Zn
Set right margin at column
#1
set_tab hts st
Sets a tab in all rows,
current column.
set_tb_margin smgtb MT
Sets both top and bottom
margins.
set_top_margin smgt Zo
Set top margin at current
line.
set_top_margin_parm smgtp Zp
Set top (bottom) margin at
line #1 (#2).
set_window wind wi
Indicates current window
is lines #1 to #2 cols #3
to #4.
start_bit_image sbim Zq
Start printing bit image
graphics.
start_char_set_def scsd Zr
Start definition of a
character set.
stop_bit_image rbim Zs
End printing bit image
graphics.
stop_char_set_def rcsd Zt
End definition of a
character set.
subscript_characters subcs Zu
List of ``subscript-able
'' characters.
superscript_characters supcs Zv
List of ``superscript-
able'' characters.
tab ht a
Tabs to next 8-space
hardware tab stop.
these_cause_cr docr Zw
Printing any of these
characters causes a
carriage return.
to_status_line tsl ts
Moves to status line,
column #1.
underline_char uc uc
Underscores one character
and moves beyond it.
up_half_line hu hu
Indicates superscript
(reverse 1/2 linefeed).
xoff_character xoffc XF X-off character.
xon_character xonc XN X-on character.
_____________________________________________________________________
_______________________________________________________
String Name Code Description
_______________________________________________________
zero_motion zerom Zx
No motion for the
subsequent character.
init_prog iprog iP
Locates the program for
init.
key_a1 ka1 K1
Specifies upper left of
keypad.
key_a3 ka3 K3
Specifies upper right of
keypad.
key_b2 kb2 K2
Specifies center of
keypad.
key_c1 kc1 K4
Specifies lower left of
keypad.
key_c3 kc3 K5
Specifies lower right of
keypad.
prtr_non mc5p pO
Enables the printer for #1
bytes.
_______________________________________________________
Notes to table:
(P) Indicates that padding can be specified.
(G) Indicates that the string is passed through tparm with parameters
as given (#i).
(*) Indicates that padding can be based on the number of lines
affected.
(#i)
Indicates the ith parameter.
EXAMPLES
The following is an uncompiled terminfo entry for the xterm terminal type:
xterm|vs100|xterm terminal emulator,
ind=^J, cols#80, lines#25,
clear=E[HE[2J, cub1=^H, am, cup=E[%i%p1%d;%p2%dH,
cuf1=E[C, cuu1=E[A, el=E[K, ed=E[J,
cud=E[%p1%dB, cuu=E[%p1%dA, cub=E[%p1%dD,
cuf=E[%p1%dC, km,
smso=E[7m, rmso=E[m, smul@, rmul@,
bold=E[1m, rev=E[7m, blink=@, sgr0=E[m,
rs1=E>E[1;3;4;5;6lE[?7hE[mE[rE[2JE[H, rs2=@
kf1=EOP, kf2=EOQ, kf3=EOR, kf4=EOS, ht=^I, ri=EM,
vt@, xon@, csr=E[%i%p1%d;%p2%dr,
il=E[%p1%dL, dl=E[%p1%dM, il1=E[L, dl1=E[M,
ich=E[%p1%d@, dch=E[%p1%dP, ich1=E[@, dch1=E[P,
use=vt100-am,
The first line of the xterm entry contains two names for the terminal type
(xterm and vs100), and a third name that fully describes the terminal. When
the terminfo entry is compiled with the tic command, entries are made in
/usr/lib/terminfo/x/xterm and /usr/lib/terminfo/v/vs100, unless the
TERMINFO environment variable was used to redefine the default path. The
TERMINFO environment variable is useful when testing a new entry, or when
you do not have write permission for the/usr/lib/terminfo directory tree.
For example, if the TERMINFO environment variable is set to/usr/raj/test,
the tic command places the compiled terminfo entries into
/usr/raj/test/x/xterm and /usr/raj/test/v/vs100. The TERMINFO environment
variable is also referenced by programs that useterminfo (such as vi), so
the new entry can be tested right away.
The second line of the xterm entry says that pressing a Ctrl-j causes the
screen to scroll up, and that the screen dimensions are 80 columns by 24
lines.
The third line of the entry sets the string that clears the screen (ESCAPE
followed by "[H", another ESCAPE, and then the string "[2J"), defines
<Ctrl-h> as the backspace key, and declares that the terminal has automatic
margins. The string for relative cursor movement is also specified, using
terminfo parameter syntax.
The rest of the capabilities are declared likewise. The last line of the
entry reads "use=vt100-am, meaning that the vt100-am terminal entry should
be read first as the basis for the xterm terminal entry, with the
capabilities explicitly defined overriding their default vt100-am values.
Note that the smul, rmul, vt, and xon capabilities are removed by following
them with an @ (at sign).
SEE ALSO
Functions: curses(3)
Commands: tic(1)
J. Strang, L. Mui, and T. O'Reilly. Termcap and Terminfo. Sebastapol,
California: O'Reilly and Associates, Inc., 1990.
|
Index for
Section 4 |
|
|
Alphabetical
listing for T |
|
 |
Top of
page |
|